 |
36000GPD het brakke Systeem van de Water Omgekeerde Osmose
Productdetails:
| Plaats van herkomst: | China |
| Merknaam: | Fenigal/OEM |
| Certificering: | CE/UL/NSF etc. |
| Modelnummer: | HM-12k~36k |
Betalen & Verzenden Algemene voorwaarden:
| Min. bestelaantal: | 1 reeks |
|---|---|
| Prijs: | Negotiable |
| Verpakking Details: | Standaard de Uitvoer Houten die Krat/Karton of Naakt door film wordt verpakt |
| Levertijd: | 15~30 dagen |
| Betalingscondities: | T/T, Western Union, Paypal enz. |
| Levering vermogen: | 50 reeks per maand |
|
Gedetailleerde informatie |
|||
| Technologie: | brakke water omgekeerde osmose | Ontwerp: | De steunbalk zet op |
|---|---|---|---|
| Terugwinningstarief: | 30~50% | Voer TDS/ppm: | <10> |
| Watertemperaturen.: | 5~35˚C | PH: | 4~9 |
| TSS/mg/L: | <5> | De index van de slibdichtheid: | <3> |
| Vrije chloor mg/l: | 0 | Smeltijzer mg/l: | <0> |
| Garantie: | 1 jaar | Materiaal: | SS304/SS316L, koolstofstaal |
| Capaciteit: | 0.5-100m3/h | Voltage: | 380V, 415V, 220V, kan worden aangepast |
| Toepassing: | Waterreiniging, Filtratie, pharmceutical, drinkwater, voedsel | Grootte: | Hangt, 1750*550*1650mm af |
| Type: | Omgekeerde Osmosesysteem | Functie: | Water het zuiveren, Ontzilting |
| Ontziltingstarief: | 99%, 99.7% | Controle: | elektronisch, Manual/PLC |
| RO membraan: | Hydranautics of DOW, 4040 | pomp: | CNP/Grundfos, CNP |
| Hoog licht: | 36000GPD het brakke systeem van de water omgekeerde osmose,het brakke systeem van de het water omgekeerde osmose van 10000ppm,36000GPD-bwroinstallatie |
||
Productomschrijving
36000GPD het brakke Systeem van de Water Omgekeerde Osmose
Highly brackish water reverse osmosis system HM12,000GPD~36,000GPD TDS<10,000ppm
HM – Series Reverse Osmosis Systems are a line of high capacity systems with flows ranging from 12,000 to 36,000 gallons per day. These systems are ideal for removing the salt content in well water and surface water for use in commercial and light industrial applications.
Using an efficient high-pressure pump, the HM – Series Systems are engineered for treating brackish water with levels of 10,000 ppm.
HM – Series Reverse Osmosis Systems feature a computer controller that has dual TDS monitoring, low pressure monitoring and alarm, pretreatment lockout, and feed flush and tank level input while larger models include an additional digital flow monitor. All models include low energy reverse osmosis membrane elements, motorized feed valve, permeate sample ports and a bag filter housing with a 5 – Micron filter bag.
Some options available for the HM – Series include permeate flush, permeate divert, variable frequency drive, chemical injection system and clean–in–place system.
Benefits
Fully Equipped and Customizable
Skid Mounted
Components Easily Accessible
Pre–Plumbed, Wired and Assembled
Individually Tested and Preserved
Low Operation and Maintenance Costs
Easy Maintenance and Servicing
20% Less Energy
1–Year Limited Warranty
Feature
|
Computer Controller LCD Backlit Display Pre–Treatment Lockout Tank Level Input Low and High Pressure Monitoring and Alarm Hour Meter Dual TDS Monitoring Feed Flush Digital Flow Meters Permeate and Concentrate Flow Meters |
Pre–Filter 0 – 100 psi Panel Mounted Glycerin Filled Gauges Pump Discharge 0 – 600 psi Panel Mounted Glycerin Filled Stainless Steel Gauges 5 –Micron Filter Bag Bag Filter Housing with Stainless Steel Stand Filmtec® LCLE Membrane Elements Vertical Multi–Stage 316L Stainless Steel Booster Pump |
Feed Low Pressure Switch FRP – Series Membrane Housings– 450 psi Pump High Pressure Switch Clean–In–Place (CIP) Ports Permeate Sample Ports High Pressure Stainless Steel Piping and Fittings White Powder Coated Aluminum Frame Wooden Shipping Crate |
Options and Upgrades
Variable Frequency Drive
Filmtec®LCHR Membrane Elements
High Pressure Tank Switch
Array Specifications
| Model | Vessel Array | Vessel Size | Vessel Quantity | Membrane Size | Membrane Quantity |
| HM – 4240 | 2:2 | 4080 | 4 | 4040 | 8 |
| HM – 6240 | 2:2:2 | 4080 | 6 | 4040 | 12 |
| HM – 8240 | 3:3:2 | 4080 | 8 | 4040 | 16 |
| HM – 10240 | 3:3:2:2 | 4080 | 10 | 4040 | 20 |
| HM – 12240 | 3:3:2:2:2 | 4080 | 12 | 4040 | 24 |
Product Specifications
| Models | HM – 4240 | HM – 6240 | HM – 8240 | HM – 10240 | HM – 12240 |
| Design | |||||
| Configuration | Single Pass | Single Pass | Single Pass | Single Pass | Single Pass |
| Feedwater Source† | TDS <10,000 ppm | TDS <10,000 ppm | TDS <10,000 ppm | TDS <10,000 ppm | TDS <10,000 ppm |
| Standard Recovery Rate % | 40 – 50 | 40 – 50 | 40 – 50 | 30 – 45 | 46 – 52 |
| Rejection and Flow Rates††† | |||||
| Nominal Salt Rejection % | 99.2 | 99.2 | 99.2 | 99.2 | 99.2 |
| Permeate Flow* (gpm / lpm) | 8.30 / 31.41 | 12.50 / 47.31 | 16.70 / 63.21 | 20.80 / 78.74 | 25.00 / 94.63 |
| Minimum Feed Flow (gpm / lpm) | 14.30 / 54.13 | 18.50 / 70.03 | 22.70 / 85.93 | 26.80 / 101.45 | 31.00 / 117.35 |
| Maximum Feed Flow (gpm / lpm) | 28 / 106 | 28 / 106 | 42 / 159 | 42 / 159 | 42 / 159 |
| Minimum Concentrate Flow (gpm / lpm) | 6 / 23 | 6 / 23 | 6 / 23 | 6 / 23 | 6 / 23 |
| Connections | |||||
| Feed FNPT (in) | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Permeate FNPT (in) | 1 | 1 | 1 | 1.5 | 1.5 |
| Concentrate FNPT (in) | 1 | 1 | 1 | 1.5 | 1.5 |
| CIP FNPT (in) | 1 | 1 | 1 | 1 | 1 |
| Membranes | |||||
| Membrane(s) Per Vessel | 2 | 2 | 2 | 2 | 2 |
| Membrane Quantity | 8 | 12 | 16 | 20 | 24 |
| Membrane Size | 4040 | 4040 | 4040 | 4040 | 4040 |
| Vessels | |||||
| Vessel Array | 2:2 | 2:2:2 | 3:3:2 | 3:3:2:2 | 3:3:2:2:2 |
| Vessel Quantity | 4 | 6 | 8 | 10 | 12 |
| Pumps | |||||
| Pump Type | Multi–Stage | Multi–Stage | Multi–Stage | Multi–Stage | Multi–Stage |
| Motor HP | 7.5 | 7.5 | 10 | 10 | 15 |
| RPM @ 60 Hz | 3450 | 3450 | 3450 | 3450 | 3450 |
| RPM @ 50 Hz | VFD at 60Hz | VFD at 60Hz | VFD at 60Hz | VFD at 60Hz | VFD at 60Hz |
| System Electrical | |||||
| Standard Voltage + Amp Draw | 220V, 60Hz, 3PH, 19.5A** | 220V, 60Hz, 3PH, 19A** | 220V, 60Hz, 3PH, 26.6A** | 220V, 60Hz, 3Ph, 26.6A** | 220V, 60Hz, 3Ph, 36A** |
| High Voltage Service + Amp Draw | 220V, 50Hz, 3PH, 22.9A** 460V, 60Hz, 3PH, 9.7A** |
220V, 50Hz, 3PH, 22.9A** 460V, 60Hz, 3PH, 9.7A** |
220V, 50Hz, 3PH, 30.9A** 460V, 60Hz, 3PH, 12.9A** |
220V, 50Hz, 3PH, 30.9A** 460V, 60Hz, 3PH, 12.9A** |
220V, 50Hz, 3PH, 45A** 460V, 60Hz, 3PH, 18.5A** |
| Systems Dimensions | |||||
| Approximate Dimensions* L x W x H (in / cm) | 31 x 100 x 64 / 787.4 x 2540 x 1626 |
31 x 100 x 64 / 787.4 x 2540 x 1626 |
31 x 100 x 64 / 787.4 x 2540 x 1626 |
31 x 100 x 64 / 787.4 x 2540 x 1626 |
31 x 100 x 64 / 787.4 x 2540 x 1626 |
| Weight lb. (kg) | 1260 / 572 | 1350 / 611 | 1460 / 662 | 1550 / 703 | 1650 / 748 |
Test Parameters: 10,000 TDS Filtered (5 –Micron), Dechlorinated, Municipal Feedwater, 65 psi / 4.50 bar Feed Pressure, 350 psi / 24.13 bar Operating Pressure, 77ªF / 25ªC, Recovery as stated, 7.0 pH. Data taken after 60 minutes of operation.
* Does not include operating space requirements.
** Varies with motor manufacturer.
Operating Limits
| Maximum Feed Temperature (°F / °C) | 85 / 29 | Maximum Turbidity (NTU) | 1 |
| Minimum Feed Temperature (°F / °C) | 40 / 4 | Maximum Free Chlorine (ppm) | 0 |
| Maximum Ambient Temperature (°F / °C) | 120 / 49 | Maximum TDS (ppm) | 10,000 |
| Minimum Ambient Temperature (°F / °C) | 40 / 4 | Maximum Hardness (gpg) | 0 |
| Maximum Feed Pressure (psi / bar) | 85 / 6 | Maximum pH (Continuous) | 11 |
| Minimum Feed Pressure (psi / bar) | 45 / 3 | Minimum pH (Continuous) | 2 |
| Maximum Operating Pressure (psi / bar) | 400 / 28 | Maximum pH (Cleaning 30 Minutes) | 13 |
| Maximum Feed Silt Density Index (SDI) | <3 | Minimum pH (Cleaning 30 Minutes) | 1 |
Low temperatures and feedwater quality, such as high TDS levels will significantly affect the systems production capabilities and performance. Computer projections must be run for individual applications which do not meet or exceed minimum and maximum operating limits for such conditions.
System pressure is variable due to water conditions. Permeate flow will increase at a higher temperature and will decrease at a lower temperature.
Product flow and maximum recovery rates are based on feedwater conditions as stated above. Do not exceed recommended permeate flow.
